No products in the cart.
-
Texecom Exodus OH Optical Smoke and Heat Multisensor (AGB-0001) Stand Alone/Domestic Smoke Detectors
- Brand Texecom
- Exodus OH/4W EN54 certified
- 12V optical heat-enhanced smoke detector for use with security control panels
- Optical & Thermal Detection
- 12V/4-wire Operation With Alarm Relay: 4W
- Suitable for fastest detection for wide range of fires
- BSI kitemark approved to EN54 Part 5
- 5 Year Warranty
- fire detectors data sheet
£26.12 Inc VAT -
Apollo 55000-317 Conventional Detection
-
wide operating voltage
-
advanced electronic technology
-
flashing LED option
-
magnetic test switch option
-
can be used on security systems
-
electrically compatible with Series 60
-
mechanically compatible with Series 60
-
proven detection performance
-
designed to meet approvals worldwide
-
Range of bases available
- Responds well to slow-burning, smoldering fires
- Well suited for bedrooms and escape routes
- Unaffected by wind or atmospheric pressure
- EN54-7
- 3-year warranty
- data sheet
£13.48 Inc VAT -
-
Hochiki YBN-R/3 Addressable/Analogue Detection
- Electronics free
- Slim profile – only 8 mm
- Rugged stainless steel wiring contacts
- Facility for remote indicator
- 3 year warranty
- specification
- Hochiki YBN-R/3 Addressable/Analogue Detection instruction
- Hochiki YBN-R/3 Addressable/Analogue Detection data sheet
£1.72 Inc VAT -
Visonic Powermax MCT-426 0-101369 Wireless Smoke Detector
- Powercode MCT-426 wireless optical Smoke detector
- Fully supervised photoelectric smoke detector
- Superior detection sensitivity
- Sound and transmitted alerts (smoke, tamper, low battery)
- Audio and visual sensitivity degradation indicators notify when the sensor needs to be cleaned
- Loud (85db) alarm sound at 3m (10ft)
- Simple wall or ceiling installation, with bracket
- Back tamper
- Includes an onboard siren
- Up to 3 years battery life
- 2 Year Warranty
£47.09 Inc VAT -
Apollo 55000-401 Addressable/Analogue Detection
-
Chamber constantly monitored to give warning of any pre-alarms on the devive.
-
LED illuminates on the detector when in fire state.
-
Fully compliant with Apollo XP95 protocol fire alarm loops.
-
LPCB Approved.
-
Full range of equipment to compliment this heat detector.
- 90°C heat detector
- Ideal in environments that are dirty or smoky under natural conditions
- Well suited for warehouses, loading bays and car parks
- Unaffected by wind or atmospheric pressure
- EN54-5
- 3 year warranty
- Apollo product datasheet
£26.51 Inc VAT -
-
Apollo ORB-OP-12001-APO Conventional Detection
- Orbis Optical Smoke
- TimeSaver Base® designed for fast installation
- StartUp™ for fast commissioning
- FasTest® reduces maintenance time
- installation guide
- Apollo ORB-OP-12001-APO Conventional Detection user manual
£13.68 Inc VAT -
Apollo 58000-600 Addressable/Analogue Detection
- Responds well to slow-burning smoldering fires
- it Well suited for bedrooms and escape routes
- Unaffected by wind or atmospheric pressure
- also Five response modes
- Remote test feature
- EN54-7
- 3-year warranty
- data sheet
£29.84 Inc VAT -
Hochiki SOC-E3N Conventional Detection
- Photoelectric Smoke Detector
- Fully compatible with the majority of existing conventional systems
- Removable, High-Performance chamber
- Remote Indicatoroutput
- Low profile design with one-piece outer cover
- Wide voltage range (12 ~ 30 V dc)
- EN54: Part 7 Approved by LPCB
- Ivory
- Datasheet
£10.36 Inc VAT -
Hochiki ALN-EN Addressable/Analogue Detection
- Removable, High Performance chamber
- Twin LEDs allow 360deg viewing – green when polling, turn red in fire
- Electronically addressed
- Pulsing/non-pulsing controlled from panel
- EN54-7
- 3 year warranty
- Hochiki ALN-EN Addressable/Analogue Detection data sheet
£26.38 Inc VAT -
Alarmsense 55000-390 Conventional Detection
- Responds well to slow-burning, smouldering fires
- Well suited for bedrooms and escape routes
- EN54-7
- 3 year warranty
- Alarmsense 55000-390 Conventional Detection user guide
- Alarmsense 55000-390 Conventional Detection data sheet
£15.60 Inc VAT -
Hochiki YBN-R/6 Conventional Detection
- 8mm Profile Design
- Twin Fire LEDs Allow 360° Viewing
- Remote Indicator Output
- Rugged Design And Electronics Free
- Quick Connections via Square Cable Clamps
- Accepts 2.5mm² Cables
- Bayonet Slot, Low Insertion Force For Detectors
- 3 year warranty
- Hochiki YBN-R/6 Conventional Detection data sheet
£1.66 Inc VAT -
Texecom Exodus FT64 64?C Fixed Temperature Heat Detector (AGB-0003) Stand Alone/Domestic Smoke Detectors
- Exodus FT64/4W EN54 Certified
- 12V Fixed 64°C Heat Detector for use with security control panels
- Suitable for environments where smoke or dust is prevalent
- Superior false alarm immunity
- BSI Kitemark approved to EN54 part 5
- 5 Year Warranty
- Texecom Exodus FT64 64?C Fixed Temperature Heat Detector (AGB-0003) Stand Alone/Domestic Smoke Detectors data sheet
£26.12 Inc VAT -
HEIMAN Smart Smoke Sensor 2
- Detects smoke and visible particles which arise by a smoldering fire
- Soundlevel of alarm: 85 dB/3m
- Low battery indication
- Battery required: Yes (1x battery CR17335)
- Battery lifetime: 3 years
- Wireless technology: Z-Wave Plus
- Smoke Sensor applies DIN EN14604
£43.69 Inc VAT -
FIBARO Smoke Sensor
- Universal, optical Z-Wave smoke detector.
- Fire alarm is signaled by sound, visual indicator blinking and by sending Z-Wave alarm and control commands.
- Built-in temperature sensor, with programmable indicator of exceeding set temperature level.
- Requires a SmartThings Hub or a compatible device with SmartThings Hub functionality.
£70.99 Inc VAT -
Hochiki YBN-R/6SK Conventional Detection
- Integral remote indicator output
- In-line Schottky Diode for Line Continuity
- Low Profile, only 8 mm
- Rugged design
- Quick connections via square cable clamps
- Accepts 2.5 mm2
cables - Bayonet slot, low insertion force for detectors
- 3 year warranty
- Hochiki YBN-R/6SK Conventional Detection data sheet
£2.48 Inc VAT -
Apollo Soteria SA5000-200APO Addressable/Analogue Detection
- Compatible with SOTERIA, XP95 and Discovery detectors
- Isolated and non-isolated devices supported
- Isolated wiper maintains connectivity during temporary removal of devices
- XPERT 8 card addressing for 254 address capability
- ‘E-Z Fit’ allows for simple mounting of the detector base after wiring
- Keyed to accept only addressable devices
- Base mark allows for LED detector alignment
- 10 year warranty
- Apollo Soteria SA5000-200APO Addressable/Analogue Detection data sheet
£3.40 Inc VAT -
Detectortesters SOLO100-001 Fire Testers
- 4.5m allowing access (with height of user) to 6m
- For use with Solo and Testifire product ranges
- 4-Section
- Test up to 6 metres (including height of user)
- Add up to 3 extension poles to
- reach up to 7 metres.*
- Test up to 4 metres (including height of user)
- 4.5m extended pole length
- 1 year warranty
- Detectortesters SOLO100-001 Fire Testers data sheet
£337.82 Inc VAT -
Detectortesters SOLOC3-001 Fire Testers
- 4Ltr compressed gas
- For Testing of CO Fire Detectors
- Must be used with SOLO 330 Dispenser
- Non-flammable
- 1 year warranty
- detectortesters-soloc3-001-fire-testers data sheet
£18.42 Inc VAT -
C-Tec C4416 Conventional Detection
- Approvals/certifications Certified to EN54-7 by Intertek (0359-CPR-00183).Application/operationUses an IR light source & photodiode to detect smoke.
- Typically used in escape routes, living areas, bedrooms & other enclosed spaces. Particularly effective at detecting slow burning fires caused by overheated electrical wiring or smouldering materials.Application temperaturen/a.Static response temperaturen/a.
- Sensitivity Nominal alarm threshold of 0.16db/m obscuration measured in accordance with EN54-7:2000.
- Supply wiring 2-wire monitored, polarity sensitive.
- Supply/operating voltage 9 to 33V DC.
- Quiescent current 30µA @ 24 VDC.
- Alarm voltage 6-33V DC.
- Alarm current 19mA @ 12-33V DC; 11mA @ 9V DC; [email protected] 6V DC.
- Alarm reset voltage Less than 1V DC (+0.5 seconds alarm reset time).
- Expansion connections Remote LED output available via ActiV base.
- Current source to the negative line, short-circuit protected.
- Max voltage 2.7V DC.
- Product dimensions (mm)102.2mm diameter x 37mm deep (detector in base); 102.2mm diameter x 57.5mm deep.
- Construction & finish White polycarbonate casing rated to UL94 V-2 with nylon parts.
- IP Rating IP42.
- Weight 99g.
- 5 year warranty
- C-Tec C4416 Conventional Detection data sheet
£12.66 Inc VAT -
Detectortesters ES3-12PACK-001 Fire Testers
- SOLO365 Smoke Cartridge
- 12 Pack
- 1 Year Warranty
- Detectortesters ES3-12PACK-001 Fire Testers data sheet
£324.88 Inc VAT -
Apollo 45681-215 Explosion Proof Equipment
- XPERT Addressing
- One way fit of detector
- Only accepts IS detectors
- Wide cable entry.
- Contains no electronic parts.
- ‘One way only’ fit
- Low insertion force.
- Large terminations.
- Lockable security fitting.
- White finish.
- Must be connected to a suitable safety barrier and protocol translator.
- 3 year warranty
- Apollo 45681-215 Explosion Proof Equipment data sheet
£8.83 Inc VAT -
Apollo 45681-209APO Addressable/Analogue Detection
-
- Enables surface wiring
- XPERT addressing
- Locking feature to prevent unauthorized detector removal
- APOLLO 45681-209APO XP95 DEEP BASE
- Apollo 45681-209APO Addressable/Analogue Detection data sheet
£2.87 Inc VAT -
-
Hochiki YBN-R/3-SCI Addressable/Analogue Detection
- Features integral SCI
- Slim profile
- Easy to fit
- 3 year warranty
- Hochiki YBN-R/3-SCI Addressable/Analogue Detection data sheet
£13.11 Inc VAT -
Xpander XPA-CB-14016-APO Wireless Detectors
- Bi-directional (monitored) radio communications
- Choice of 4 tone pairs
- Certified to EN54-25
- 10 year warranty
- Xpander XPA-CB-14016-APO Wireless Detectors data sheet
- Xpander XPA-CB-14016-APO Wireless Detectors user guide
£392.68 Inc VAT -
Xpander XPA-OP-12034-APO Wireless Detectors
- modern styling
- loop-powered interface operating on 868MHz
- wireless addresses seen by control panel as normal addresses
- radio base with wireless circuitry and battery compartment
- chamber designed to inhibit dirt penetration and thus reduce false alarms
- automatic drift compensation with DirtAlert™ warning
- algorithms for transient alarm rejection FasTest™ reduces time taken to test detectors
- remote test facility
- 3-5 years battery life
- Xpander XPA-OP-12034-APO Wireless Detectors data sheet
- Xpander XPA-OP-12034-APO Wireless Detectors user guide
£89.22 Inc VAT -
Apollo ORB-OP-52027-APO Explosion Proof Equipment
- TimeSaver® Base
- Patented FasTest® enabling functional testing in four seconds
- DirtAlert® indicates limit of drift compensation
- Tolerates extreme operating conditions: -40°C to +70 °C
- False alarm reduction
- Flashing LED option
- Apollo ORB-OP-52027-APO Explosion Proof Equipment data sheet
- Apollo ORB-OP-52027-APO Explosion Proof Equipment user manual
£68.07 Inc VAT -
Detectortesters SOLO823-001 Fire Testers
- Consists of:
- 1x Solo A3 smoke aerosol (250ml)
- 1 x Solo 330 Aerosol Dispenser
- 1 x Solo 100 Telescopic Pole
- 3 x Solo 101 Extension Pole
- 1 x Solo 200 Universal Removal Tool
- 1 x Solo 461 Cordless Heat Kit (UK lead)
- 1 x Solo 610 Storage Bag
- 1 year warranty
- Detectortesters SOLO823-001 Fire Testers data sheet
£1,859.92 Inc VAT -
Apollo 55000-316 Conventional Detection
- Responds well to slow-burning, smouldering fires
- Well suited for bedrooms and escape routes
- Unaffected by wind or atmospheric pressure
- EN54-7
- 3 year warranty
- Apollo 55000-316 Conventional Detection user guide
- Apollo 55000-316 Conventional Detection data sheet
£14.26 Inc VAT