• Honeywell Intellisense IS3012 Pet Immune

    • 12m x 17m detection range with selectivity Pet immunity up to 45kg
    • Easy access to connectors with quick plug-in feature
    • Sealed Optics and Electronics and integrated screw retention features
    • Superior Detection and False Alarm Immunity
    • Selectable Look Down and PIR White Light Immunity
    • Sleek, Sturdy Housing
    • Sealed Optics and Electronics
    • Pet-friendly Selectivity
    • Integrated Screw Retention Features
    • Uniform Sensitivity Optics
    • Wall-to-Wall Coverage
    • Superior Detection and False Alarm Immunity
    • Selectable Look Down
    • PIR White Light Immunity
    • Flashlight Walk Test
    • Flexible Mountings
    • Honeywell Intellisense IS3012 Pet Immune user manual 
    • Honeywell Intellisense IS3012 Pet Immune data sheet
  • Guardall W76561 Dual Techs

      • Voltage 12V (9V to 16V dc)
      • Current Quiescent (no alarm) : 13mA @ 12V
      • Max All LEDs On : 18mA @ 12V
      • Max. Ripple 2V peak to peak @ 12V dc
      • Temperature Range -10°C to +55°C (14°F to 130°F)
      • Microwave power 0.011 microW/cm2 at 1m (average)
      • Microwave frequency X-band
      • Microwave range adjustment 50% to 100% of range via pot adjustment
      • Fluorescent lights Microwave channel rejects these to within 2m of an 80W tube
      • PIR coverage adjustment Vertically: none required
      • Horizontally: 5° corner mounted
      • Alarm Output Normally closed (NC), voltage free, solid state relay rated at 30
      • V dc, 50 mA with a max. 26 ohm ON resistance.
      • Alarm period Approximately 3 seconds
      • Tamper Output Normally closed (NC), voltage free, solid state relay rated at 24
      • V dc, 50 mA
      • End of line resistors Selectable: (Alarm, Tamper, Aux)
      • Option A: Guardall 8k2, 8k2, 8k2
      • Option B: 1k0, 1k0, 12k
      • Option C: 4k7, 2k2, 2k2
      • Option D: 6k8, 4k7, 15k
      • Walk test LED’s RED – Unit alarm
      • GREEN – Microwave channel
      • YELLOW – PIR channel
      • Remote LED enable Control of LED indication using Test line
      • Microwave/PIR trouble Indicated on LED’s if selected
      • Test Input Low or open circuit for LED disable, detector supply to activate.
      • Packed weight 135g approximately.
      • Dimensions (H x W x D) 110 x 66 x 42mm
  • Guardall W76558 Dual Techs

        • Latching Standard (L-type) latching
          Anti-masking Indicated on Aux output and LED’s if selected
          Remote LED enable Control of LED indication using Test line
          Walk test LED’s RED – Unit alarm
          Option D: 6k8, 4k7, 15k
           C: 4k7, 2k2, 2k2
           B: 1k0, 1k0, 12k
           A: Guardall 8k2, 8k2, 8k2
          End of line resistors Selectable: (Alarm, Tamper, Aux)
          Aux. period Duration of fault or mask condition.
          Alarm period Approximately 3 seconds
          V dc, 50 mA with a max. 26 ohm ON resistance.
          Alarm and Aux Outputs Normally closed (NC), voltage free, solid state relay rated at 30
          Horizontally: 5° corner mounted
          PIR coverage adjustment Vertically: none required
          Temperature Range -10°C to +55°C (14°F to 130°F)
          Max. Ripple 2V peak to peak @ 12V dc
          Max All LEDs On : 17mA @ 12V
          Current Quiescent (no alarm) : 9mA @ 12V
          Voltage 12V (9V to 16V dc)
        • PIR trouble Indicated on Aux. output and LED’s if selected
        • Test Input Low or open circuit for LED disable, detector supply to activate.
        • Control Input Low or open circuit for unset, detector supply for set
        • Packed weight 115g approximately.

Main Menu