No products in the cart.
5Products found
Filter
-
Quantec QT604 Social Alarm/Telemedicine/PERS
- Quiescent current TBC.
- Alarm current TBC.
- Indicators Red/Green Reassurance LED (lit green when device is isolated)
- Controls Isolation keyswitch (switches monitoring off when ISOLATED); Reset button (cancels calls made from the monitoring point and from devices wired on the same Zone).
- Note that a QT604M magnetic reset version is also available.ConnectionsNet +: Net -; R; G; L+; SW,Expansion connections R (Red) and G (Green) connections allow the connection of an optional slave overdoor light.
- Alternatively G (Green) and SW (Switch) can be used for an optional Call Alert Unit allowing telephone monitoring (see instructions)
- .Onboard 6.35mm Remote Jack Socket No.
- Onboard Infrared Receiver No.
- Product dimensions (mm)87 W x 87 H x 29 D mm.
- Mounts on a UK 25mm single gang back box.
- Construction & finish Plastic.
- IP Rating IP41.
- Weight 90g
- Operating conditions/temperature -5ºC to +40ºC. Max. relative humidity 95% non-condensing.
- 12 months warranty
- Quantec QT604 Social Alarm/Telemedicine/PERS user manual
- Quantec QT604 Social Alarm/Telemedicine/PERS data sheet
£63.17 Inc VAT -
CQR FP3/RD Pull Stations/Manual Call Points
- Surface or flush mounted
- Frangible and resettable windows
- 470 or 680ohm resistor settings
- EN54-11
- Single change over
- Resettable or non-resettable
- Available in red, green or white
- High visibility LED
- Red is CPR and EN54-11 approved
- 2 year warranty
- CQR FP3/RD Pull Stations/Manual Call Points data sheet
- CQR FP3/RD Pull Stations/Manual Call Points user manual
£8.58 Inc VAT -
Quantec QT602 Social Alarm/Telemedicine/PERS
- Use to generate calls on a Quantec system
- Power requirements Nominal 24V DC (from Quantec Controller/Network).
- Quiescent current is less than 3mA.
- Alarm current14mA.I
- indicators Red/green confidence LED.
- ControlsCall button; Reset button.
- (QT602M magnetic reset version also available).ConnectionsNet +: Net -; R; G; L+; SW; IR; SLV.Expansion connections R; G; L+; SW; IR & SLV terminals allow the connection of optional slave overdoor lights, slave call points, slave ceiling pulls and slave infrared receivers.
- Onboard 6.35mm Remote Jack Socket Yes – for the optional connection of tail call leads/pear pushes, pressure mats and movement detectors.
- Onboard Sounder No.
- Onboard Infrared Receiver No.
- Product dimensions (mm)86 W x 86 H x 30 D mm.
- Can be mounted on a standard UK 25mm single gang flush or surface back box.
- Construction & finish Plastic.
- IP Rating IP20.
- Weight 72g.
- 12 months warranty
- Quantec QT602 Social Alarm/Telemedicine/PERS user manual
- Quantec QT602 Social Alarm/Telemedicine/PERS data sheet
£52.68 Inc VAT -
C-Tec NC802DEB-1/2 Social Alarm/Telemedicine/PERS
- Button reset with remote socket
- Can generate standard and emergency calls
- 12 months warranty
- C-Tec NC802DEB-1/2 Social Alarm/Telemedicine/PERS user manual
- C-Tec NC802DEB-1/2 Social Alarm/Telemedicine/PERS data sheet
£33.18 Inc VAT -
C-Tec NC809DB Social Alarm/Telemedicine/PERS
- Can be used to reset devices which do not have an onboard reset facility
- Quiescent current 0mA (none).
- Alarm current Determined by the type of control equipment and number / type of field devices connected to the system.
- Indicators Red Reassurance LED and Sounder.
- Controls Reset button.
- Connections SIG (Signal); -Ve (Negative); +Ve (Positive).
- Product dimensions (mm)87 W x 87 H x 24 D mm.
- Mounts on a UK 25mm single gang back box.
- Construction & finish Plastic.
- IP Rating IP41.
- Weight 55g.
- Operating conditions/temperature-5ºC to +40ºC. Max. relative humidity 95% non-condensing.
- 12 months warranty
- C-Tec NC809DB Social Alarm/Telemedicine/PERS user manual
- C-Tec NC809DB Social Alarm/Telemedicine/PERS data sheet
£11.10 Inc VAT