No products in the cart.
Voice Evacuation Alarms
Get the Voice Evacuation Alarms to CCTV Builder. Voice Evacuation Alarms are specially designed public address systems. it’s used during fire situations, that the Life Safety Code. Buy the provides Voice Evacuation Alarms and checked items below listed.
-
C-Tec ECU-4 Voice Evacuation Alarms
- Allows operators to communicate with the systems outstations
- Connects with 4 outstations
- Backlit LCD and handset
- Wall-Mounted
- Max 2x7Ah batteries
- 1 year warranty
- engineering manual
- quick start guide
- C-Tec ECU-4 Voice Evacuation Alarms user manual
- C-Tec ECU-4 Voice Evacuation Alarms data sheet
£1,027.69 Inc VAT -
C-Tec ECU-8 Voice Evacuation Alarms
- Approvals/certifications Facilitate compliance with BS5839-9 when correctly installed
- Mains supply 230V 50/60Hz.
- Mains rated current500mA.
- Internal power supply 19V-28.5V (27V nominal). Ripple 7V maximum (battery fault).
- Total output current limited to1.5A @ 230Vac Quiescent current100mA (controller with fault buzzer sounding) plus 1mA per Type A outstation and 3.2mA per Type B outstation.
- Max battery size and type2 x 12V 7Ah VRLA connected in series.
- No. of lines8.Auxiliary relay changeover fault relay (failsafe). 30V 1A max
- Open collector outputs(OP1): Activates when the ECU is ringing; (OP2) Activates when there is an active accessible toilet alarm call; (OP3) Closes when the handset is off-hook and remains active for 2 mins after it is replaced. 24V, 50mA max.
- Other outputs +24 V.
- Typically used to supply power to equipment connected to the ECU’s open-collector outputs (relays, etc). Engineer (AL3) functions Engineer mode and reset buttons (internal).
- Indicators 128 x 64 pixel LCD display; Disablement; System fault; PSU fault; General fault; Power on.
- ControlsSilence Buzzer.
- Other controls are available but are not applicable as no handset is provided on this unit.
- Product dimensions (mm)410 W x 250 H x 80 D mm (base); 439 W x 274 H x 7 D mm (lid).
- Construction & finish metal lid and base, RAL7035 grey texture.
- IP Rating IP20.
- Weight 3.1kg (without batteries).
- Operating conditions/temperature-5ºC to +40ºC. Max relative humidity: 95%.
- 1 year warranty
- C-Tec ECU-8 Voice Evacuation Alarms data sheet
£1,309.79 Inc VAT -
C-Tec EVC302F Voice Evacuation Alarms
- Flush mounted version
- Touch of a button communication
- Duplex operation
- High quality brushed stainless steel finish
- Includes connections for an optional induction loop system
- 1 year warranty
- C-Tec EVC302F Voice Evacuation Alarms user manual
- C-Tec EVC302F Voice Evacuation Alarms data sheet
£208.36 Inc VAT -
C-Tec EVC302GF Voice Evacuation Alarms
- Flush mounted version
- Touch of a button communication
- Duplex operation
- Finished in a tough, durable green steel
- Includes connections for an optional induction loop system
- 1 year warranty
- C-Tec EVC302GF Voice Evacuation Alarms instruction
- C-Tec EVC302GF Voice Evacuation Alarms data sheet
£188.64 Inc VAT -
C-Tec EVC302GS Voice Evacuation Alarms
- Approvals/certifications Facilitate compliance with BS5839-9 when correctly installed
- Supply/operating voltage 11V DC derived from a compatible SigTEL Master Controller (drops to 6 V DC when in use).
- Quiescent current 3m AA ctivation current 25mA (current draw when intercom is in use).
- Open collector outputsO/P +Ve & O/P –Ve (closes when outstation is active, typically used to trigger a third party CCTV camera, opto-isolated, normally open, max. 24 V DC, 3 mA).
- Indicators Red call in progress LED Controls External ‘Push to Call or Answer’ button (Off Hook); Internal Loudspeaker volume control; Engineer’s “On Hook” and “Off Hook” pins.
- Expansion connections AFILS +Ve & AFILS –Ve (typically connected to the line-level input of an optional induction loop amplifier): Off-Hook and -Ve (can be optionally connected to an NC951 accessible toilet alarm kit (see instructions for details).
- Product dimensions (mm)160 W x 240 H x 53 D mm.Construction & finish Green steel.
- IP Rating IP20.
- Weight 1.3 kg.
- Operating conditions/temperature -5ºC to +40ºC. Max relative humidity: 95%.
- 1 year warranty
- C-Tec EVC302GS Voice Evacuation Alarms data sheet
£199.86 Inc VAT -
C-Tec EVC302S Voice Evacuation Alarms
- Surface mounted version
- Touch of a button communication
- Duplex operation
- High quality brushed stainless steel finish
- Includes connections for an optional induction loop system
- 1 year warranty
- C-Tec EVC302S Voice Evacuation Alarms installation
- C-Tec EVC302S Voice Evacuation Alarms data sheet
£222.05 Inc VAT -
C-Tec EVC385 Voice Evacuation Alarms
- Compatibility Suitable for use with SigTEL ECU-4, ECU-8, ECU-8S and ECU-8NT controllers).
- Product dimensions (mm) Front face when in situ measures 456 W x 293 H mm.
- Actual depth of bezel is 31mm.
- Hole required for semi-flush mounting is 412 W x 255 H x 50 D mm.
- Construction & finish Mild steel.
- Weight 0.50kg.
- Bezel for semi-flush mounting ECU-8 Controllers
- 1 Year warranty
- C-Tec EVC385 Voice Evacuation Alarms data sheet
£34.97 Inc VAT
